ZEISS Metrology Expert Tips!

Do you know how to position parts correctly for X-ray measurements?

In this video, our expert for X-ray fixturing, Fabian Friedl, shows how to correctly position components for measurements with X-ray systems and which three points need to be observed.

Do you know the most important rule in X-ray measurement for fixturing?

Do you know the most important rule for fixtures when measuring with X-ray systems? If not, then it's time you do! Our expert Fabian Friedl knows the rule and reveals it to you in the latest ZEISS Metrology Expert Tip video.

Why is there no temperature expansion with ZEISS REACH CFX® Extensions?

There are also limits to the expansion of strains due to temperature changes so as not to influence the measurement result. In this video, our expert Philipp Wonschak shows you how temperature expansion can be prevented. Just a little hint: the material of the extension is a decisive factor.

Have you ever thought about limit values of the ZEISS VAST XXT probes?

In metrology, there are limits that must be observed. For example, compliance with various limit values for the ZEISS VAST XXT probe extensions are particularly important in order to achieve reliable measurement results. In this video, our expert Philipp Wonschak explains how these limit values are calculated and how to comply with them.

Do you know how easy it is to assemble your extension?

For us at ZEISS, ZEISS extensions are also measuring instruments that should be checked carefully. In this video, our expert Philipp Wonschak shows you how to do this and how to assemble ZEISS extensions correctly. It's easy! If you know how to do it!

Do you know why carbon fiber is the best material for extensions and offers an upgrade in terms of accuracy?

In this video, our expert Philipp Wonschak shows you how you can efficiently upgrade your ZEISS measuring device in terms of measuring accuracy. This is because the material from which the extensions are made has the greatest influence on the measuring accuracy.

How to measure with very deep widths.

If you work with a large ZEISS ACCURA or ZEISS MMZ machine, you should not miss this tip. The problem with standard adapter plates is often that they can only measure up to a width of 800 mm without affecting the measurement result. However, this horizontal depth is not sufficient for large workpieces. ZEISS has the solution for this case.

How you recognize the latest ZEISS Adapter Plate.

Only certified ZEISS Adapter Plates unlock the full potential of your ZEISS Coordinate Measuring Machine. Our expert Philipp Wonschak explains in this ZEISS Metrology Expert Tip video why this is and how you can recognize the latest generation of ZEISS Adapter Plates.

Do you know why there are adapter plates with integrated extensions?

In this video, our expert Philipp Wonschak reveals the specific advantages of an optimized adapter plate with directly integrated extension and how ZEISS manages to make the change from a normal adapter plate to one with integrated extension as easy as possible for you.

How to mount, fit and check adapter plates correctly?

If the adapter plates are no longer probably attached probe and wobbles, these effects the accuracy of the measurement result. Therefore, our expert, Philipp Wonschak, explains you in this video how to mount, fit and check ZEISS adapter plates correctly by yourself.

Do you know that ZEISS ProMax E offers maximum usage of the measurement volume?

In this video, Armin Barthel, our expert for ZEISS Sensor Racks, introduces you to the ZEISS ProMax E and gives you helpful tips and information about the product, which allows you to make optimum usage of the measuring range for your workpiece, as it automatically performs the stylus switch and moves back outside the measuring range.

Do you know that you can use both sides of the ZEISS Multi Sensor Rack?

How do you measure a large number of components in the shortest possible time compared to standard systems? With the ZEISS Multi Sensor Rack Duplex! It has a front and rear side and thus offers storage options for different stylus systems. Our expert Armin Barthel explains exactly how it works.

How to mount ZEISS Multi Sensor Rack 2.0 for individual applications.

In this ZEISS Metrology Expert Tip video, Armin Barthel goes into detail about the ZEISS Multi Sensor Rack 2.0, which offers twice as much storage capacity for ZEISS stylus systems compared to the ZEISS Multi Sensor Rack Mini, and he will show you how to install it correctly.

With ZEISS Multi Sensor Racks complex measurements can be done efficiently.

Do you actually know what kind of metrology challenges ZEISS Multi Sensor Racks solve? Our expert Armin Barthel will explain it to you and at the same time he gives you an insight into the ZEISS portfolio, which includes both rigid and automated sensor racks in various sizes and designs for all ZEISS coordinate measuring machines.

Do you know the current accuracy status of your measuring machine?

After a collision, you should always check the accuracy of your measuring device with a ZEISS Accuracy Check: In this video, our expert Armin Barthel explains how to carry out the check and which accessory you need.

Did you know that ZEISS can diagnose the mechanical condition of your machine remotely?

Have you ever been unsure about the reliability of your measuring machine? Or worse, have you feared an unexpected failure? Our expert Philipp Kieninger will show you what you should definitely do in such situation.

Please note: Unfortunately, at the moment the ZEISS Smart Services Remote Health Check is not feasible in India. Therefore, the ZEISS Health Check Kit in not available.

What can I do after a collision to check the mechanical condition of the machine?

Unfortunately, collisions are sometimes unavoidable. The questions that many metrologists ask themselves in such a situation are: Is my machine still operational? Does my device still measure accurately? Our experts Armin Barthel and Philipp Kieninger tell you what you should do in this situation.

Please note: Unfortunately, at the moment the ZEISS Smart Services Remote Health Check is not feasible in India. Therefore, the ZEISS Health Check Kit in not available.

How to avoid measurement inaccuracies due to wear.

As your measurement device and therefore the associated ZEISS stylus is in constant use, you should check the stylus at regular intervals. In this video Philipp Wonschak shows you how you can easily detect signs of wear to avoid measurement inaccuracies.

Do you know the difference between a ZEISS M3 XXT and a M3 (touch-trigger) stylus?

In this ZEISS Metrology Expert Tip video Philipp Wonschak explains in detail the difference between a ZEISS M3 XXT stylus and a M3 (touch-trigger) stylus. Furthermore, he addresses the question: why a normal M3 stylus should never be used with a ZEISS VAST XXT probe.

Did you know that not every sphere is really a round sphere?

If you take a closer look at a stylus sphere, it seems to be round. But is that true? Our expert Philipp Wonschak gets to the bottom of this question and explains how ZEISS manages to guarantee absolute measurement reliability.

How to achieve reproducible measurement results.

The stylus system has the biggest influence on the measurement result. And therefore, in this video our metrology expert, Philipp Wonschak, gives you the tip on: How to check your stylus for repeatability to easily achieve accurate and precise measurement results.

How you can easily register for the ZEISS Metrology Shop with your ZEISS ID.

In the latest ZEISS Metrology Expert Tip Anna Kircher shows you how you can easily register for the ZEISS Metrology Shop with your ZEISS ID and what advantages online purchasing of ZEISS Accessories has for your company. You have not applied for a ZEISS ID yet? Then it is time!

Do you know that the temperature of the measured part is important to get reliable results?

One of the biggest influences on the measurement result is not visible to us: the temperature of the component to be measured. That's why our expert Aline Nehm gives you three tips in the latest video on how you can control the temperature and thus ensure reliable measurement results.

Some things are made for each other!

In this video, our expert Philipp Wonschak reveals how to get the best performance out of your ZEISS device and which factors most influence precise measurements. The video is the start of our new ZEISS Metrology Expert Tip video series.